Panasonic interior automatic induction door |
| |
|
|
|
|
Features
- Rebound safely after encountering resistance, rebound to the fully open position.
- Position memory 1 After the first time it encounters resistance and rebounds, it will pass through the conflicting position again, and it will run at a low speed.
- After position memory 2 bounces under resistance for the second time, it will pass through the conflicting position again. If there is still an obstacle, it will stop running after bounce 2cm under resistance, and resume normal operation after receiving the door open signal.
- The function of preventing repeated opening of the door will automatically power off if the door is opened and closed more than 10 times within 3 minutes, and will resume normal operation after 2 minutes.
- Full-open hold function: Hold the door in the fully-open position for 3 seconds, the door will remain open, and automatically close after 1 minute; or use the remote control to press the "normally open" button, press the "auto" button when it is released, the door will automatically close .
- Double door synchronization function Two sets of automatic doors realize synchronous opening and closing
Working principle
Linear motor is a transmission device that directly converts electrical energy into linear motion without any intermediate conversion mechanism. It can be regarded as a rotating motor which is sectioned in the radial direction and developed into a plane. It has the advantages of simple structure, high precision, sensitive response, safety and reliability.
Name |
Principle |
Features |
New drive
the way |
The linear motor is integrated with the door, attracting and repelling each other through magnets
Achieve linear motion, realize the opening and closing of the door |
Less friction points,
efficient |
Low noise |
Little friction
Generate dust |
Traditional drive |
The door is connected with the belt, and the belt is driven by the rotating motor to realize the opening and closing of the door |
There are many friction points,
low efficiency |
loud noise |
High friction generates dust |
Technical Parameters |
|
|
Door style |
Single |
Track length |
1550~2650mm |
Door weight |
20~50kg |
Door width |
700~1250mm |
Door machine track installation method |
Superficial |
Built-in |
Door chassis size (width × height) |
61.5×95mm |
83.5×60mm |
Opening speed |
300/400/500mm/s three levels adjustable (factory setting 400mm/s) |
Closing speed |
200/300/350mm/s three levels adjustable (factory setting 300mm/s) |
Opening hours |
1~10s (factory setting 3s) |
Manual opening force |
≤14.7N (1.5kgf) |
Ambient temperature |
-10~40℃ |
Voltage |
AC 220V±10% |
|
|
